1000SI Series Uniaxial Capacitive Accelerometer

Dynalabs > 1000SI Series Uniaxial Capacitive Accelerometer









                   Sensor Type: Seismic Accelerometer

                   Sensor Technology: MEMS Capacitive

                   Sensitive Direction: Uniaxial

                   Output Signal: Voltage

                   Ranges (g): ±3, ±5

                   Protection class: IP68

                   Temperature: -40°C to +100°C

                  Housing material: Aluminum/Stainless Steel

                     • Accurate and stable seismic measurements

                     • Wide frequency response

                     • Accurate DC Measurement

                     • Voltage Output

                     • Ultra-low noise, low power

                     • High shock protection

                     • High resolution

                     • Gas damping



                                                                                             • Seismic measurements
                                                                                             • Structural monitoring and testing
                                                                                             • Safety systems measurements
                                                                                             • Noise measurements

DynaLabs 1000 SI series high-end capacitive MEMS accelerometers specially designed for seismic measurements.

These ultra-low noise accelerometers provide excellent bias and scale factor stability and a wide frequency range (±3dB) from 550 Hz to 700 Hz.

They provide flexible power supply voltage from 6 to 40 VDC. 

Full-scale acceleration (g) 1003SI ±3 1005SI ±5
White Noise
Noise (Integrated over 0.1Hz to 100Hz)
Dynamic range (0.1Hz to 100Hz)
Scale Factor Sensitivity
Bandwidth (±3dB)
Operating power consumption

Frequently Asked Questions

MEMS (Micro Electro-Mechanical System), is a chip-based technology which contains a microscopic mechanical structure inside. MEMS sensors can be used to measure physical parameters such as acceleration.


The most prominent feature of MEMS technology is their miniaturized dimensions. They are small, lightweight and reliable. MEMS technology gives high-sensitivity output and it provides us with ease of integration. DynaLabs MEMS sensors can measure low frequencies such as 0 Hz.

Capacitive MEMs accelerometers, also known as vibration sensors, are small, lightweight and have a DC response. A capacitive accelerometer measures the acceleration on a surface using capacitive sensing techniques. DynaLabs Capacitive accelerometers convert capacitance change into voltage. MEMS-based capacitive accelerometers provide accurate vibration measurements in performance-driven applications. Capacitive accelerometers have excellent long-term stability and reliability and work well at low frequencies.


Dynalabs Capacitive accelerometers have 2 types: Uniaxial (1000 Series) and triaxial (3000 Series). They have 3 different groups within themselves: LN, DE and SE series.

A single-ended (SE) measurement is taken as the voltage difference between a wire and ground. The noise is only on the positive wire and is consequently measured together with the output voltage from the sensor. These sensors also have a positive bias voltage.


DE series accelerometers are Differential Ended sensors. A differential voltage has no reference to ground. The measurement is taken as the voltage difference between the two wires(+) and (-). The main benefit of a differential measurement (DE)  is noise rejection, because the noise is added to both wires and can then be filtered out by the common mode rejection of the data acquisition system. Furthermore, there is almost no bias voltage.


LN series accelerometers are Low Noise version of Differential Ended sensors.

Piezoresistive sensors are also MEMS sensors. The sensing  material is piezoresistors which change resistivity according to the acceleration. Piezoresistive MEMS accelerometers are usually low sensitivity devices used in shock and drop testing applications. Piezoresistive sensors are used in high impact and shock applications with very high accelerations from ±100 g to ±6000 g.


Dynalabs Piezoresistive accelerometers have 2 types: Uniaxial (4000 Series) and triaxial (5000 Series).

MEMS Gyroscopes are used whenever angular velocity sensing (°/s) is required. MEMS gyroscopes operate with high precision. They do not have rotating parts that require bearings and this allows an easy miniaturization.


DynaLabs Gyroscopes have 2 types: Uniaxial (6000 Series) and triaxial (7000 Series).

IMU is a sensor that collects angular velocity and linear acceleration data in a single module. The IMU’s mission is to determine the speed and angle of rotation of the device or vehicle.


Dynalabs IMUs are based on triaxial accelerometers and triaxial gyroscopes that are integrated in a single housing. Any combination of gyroscopes and accelerometers is possible.


Dynalabs IMUs enable separate analog voltage outputs for all 6 degrees of freedom (DOF).